MOOG Coil Spring Set
MOOG® Problem Solver® products incorporate proven design and engineering features for like new steering, ease of installation and longer life. MOOG is the preferred steering and suspension brand of professional technicians and NASCAR crew chiefs.
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
- Also Fits
COIL SPRING ATTRIBUTES
|ID - Inches||4.04|
|ID - MM||102.60|
|Bar Diameter - Inches||0.57|
|Bar Diameter - MM||14.70|
|Spring Rate - lbs per inch||146|
|Load - lbs||503|
|Installation Height - Inches||15|
|Installation Height - MM||381|
|Free Height - Inches||18.40|
|Free Height - MM||467.40|
|End Type 1||Tangential|
|End Type 2||Pigtail|
|Spring Type||Variable Rate|
Q.How can I tell when I need to replace coil springs?
A.Weak or worn springs lower the chassis height of a vehicle causing it to sag, which results in premature tire wear and poor handling characteristics. If your vehicle is sagging, have it checked by a professional shop.
Q.Which end is installed up?
A.The configuration of the ends of a replacement spring should remain nearly identical to that of the original equipment spring. In some cases, a white dot on the spring and/or label that says this end up will help identify the correct orientation.
Q.Do I need special tools to install the spring?
A.Most suspensions require a coil spring compressor to compress the spring during installation.
Q.When I install my new springs, will the height of my vehicle change?
A.Over time, your original equipment springs may sag. The replacement springs are designed to return your vehicle to the factory recommended height. The vehicle may sit high initially. Allow the replacement springs to settle.
Q.How do I find the right part number for my vehicle?
A.Visit www.fmmotorparts.com and select the Parts Finder feature. You can look up your part by entering your vehicle information, VIN number, license plate number or competitor part number.
|Make||Model||Year Range||Position||Drive Wheel||Veh. Qty.||Engine Base||Engine VIN||Engine Desg|
|Jeep||Cherokee||1991-1987||Front||RWD||1||4.0L L6 (242 CID)|
|Jeep||Comanche||1992-1989||Front||4WD||1||4.0L L6 (242 CID)|
|Jeep||Wagoneer||1986-1984||Front||1||2.8L V6 (173 CID)|
|Jeep||Comanche||1990-1986||Front||4WD||1||2.5L L4 (150 CID)|
|Jeep||Cherokee||1986-1984||Front||1||2.8L V6 (173 CID)|
|Jeep||Wagoneer||1987-1984||Front||1||2.5L L4 (150 CID)|
|Jeep||Cherokee||1990-1989||Front||4WD||1||4.0L L6 (242 CID)|
|Jeep||Cherokee||1996-1992||Front||1||4.0L L6 (242 CID)|
|Jeep||Cherokee||1990-1985||Front||1||2.5L L4 (150 CID)|